Eiki LC-HDT10 - Manual (Page 15)

15
CONNECTING PROJECTOR
CONNECTING TO VIDEO EQUIPMENT
INPUT 1
INPUT 2
INPUT 3
CONTROL PORT
CONTROL PORT AUDIO
R/Pr G/Y B/Pb H/HV V
(MONO)
R L
(MONO)
AUDIO OUT
R L
R/C JACK USB
SERIAL PORT IN
SERIAL PORT OUT
RESET
INPUT 4
SDI IN1 SDI IN2 SDI OUT
DVI
AUDIO
(MONO)
R L
Video Source (example)
Audio Amplifier Audio Speaker (stereo)
Audio Cable
(Stereo) ✽
Audio Input
Cables used for connection
• Video Cable (BNC) ✽
• Audio Cable (RCA x 2) ✽
• Scart Cable ✽
• DVI-VGA Adapter ✽
( ✽ = Cables are not supplied with this projector.)
NOTE :
When connecting cable, power cords of both a
projector and external equipment should be
disconnected from AC outlet. Turn a projector
and peripheral equipment on before computer is
switched on.
Audio Output
Y Pb/Cb Pr/Cr R L
External Audio Equipment
AV AUDIO IN
Pr/Cr-Y-Pb/Cb
AUDIO OUT
Component video output equipment.
(such as DVD player or
high-definition TV source.)
Component Video Output
Audio Cable
(Stereo) ✽
Terminals of
a Projector
RGB Scart
21-pin Output
Scart
Cable
✽
DVI-VGA
Adapter ✽
SDI IN 1/SDI IN 2
Video Equipment with
SDI signal output/input
DVI
SDI Output SDI Input
SDI OUTPUT
Video Equipment with
Digital video signal output
DVI
Digital Video Output
BNC Cable ✽ BNC Cable ✽