PLANET WNAP-W2200 - Manual (Page 60)

User Manual of WNAP-W2200
-52-
Appendix C: Specifications
Product
WNAP-W2200
300Mbps 802.11n Wireless In-wall Access Point
Hardware Specification
PoE Port:
1 x 10/100Mbps Auto MDI/MDI-X RJ45 port (Rear Panel)
IEEE 802.3af PD Port ※
LAN Port: 1 x 10/100Mbps Auto MDI/MDI-X RJ45 port (Front Panel)
Interface
USB Port : USB 2.0, Type-A, 5V DC/0.5A Output
PoE IEEE 802.3af
Antenna Built-in 3dBi antenna x2
Reset Button
Reset button at front panel
Press over 7 seconds to reset the device to factory default
LED Indicators PWR/SYS LED
Material Plastic
Dimensions 86 x 86 x 36 mm (L x W x H)
Weight 113g
Power Requirements 48V DC, 320mA
Power Consumption < 10W
Wireless interface Specification
Standard Compliant with IEEE 802.11b/g/n
Frequency Band Europe / ETSI: 2.412~2.472GHz (13 Channels)
Channel Width 20 or 20/40MHz
Transmission Distance
Indoor up to 100m
Outdoor up to 300m (it is limited to the environment)
RF Power
(Intentional Radiator)
IEEE 802.11b: 18dBm
IEEE 802.11g: 15dBm
IEEE 802.11n: 15dBm