PLANET WNAP-W2200 - Manual (Page 33)

User Manual of WNAP-W2200
-25-
5.3.3 Wireless Access Control
Choose menu “WLAN Settings  Wireless Access Control”, you can choose to allow or deny the computer of
specified MAC address to wirelessly connect with the WNAP-W2200 on this page. After configuration is done,
please click the “Apply” button to save the settings.
Figure 5-8 Wireless Access Control
The page includes the following fields:
Object Description
 SSID:
Display the current SSID.
 MAC Restrict Mode:
You can choose to set the Allow, Deny or disable this function.
 MAC Address:
Enter the MAC address you want to allow or deny to connect to the
WNAP-W2200 in the field. Then, click “Add” to add the MAC address
to the control list.
 Current Access Control
List:
You can select some MAC address, and click the “Delete” button to
delete it.
To deny a PC at the MAC address of 00:30:4f:11:22:33 to connect to your wireless network, do as follows:
Step 1. Select “Deny” from MAC Address Filter drop-down menu.