PLANET WNAP-W2200 - Manual (Page 36)

User Manual of WNAP-W2200
-28-
The page includes the following fields:
Object Description
 System Contact:
Set the name to access the AP. Usually set the administrator’s name.
 System Name:
Set the AP’s name, such as “WNAP-W2200”.
 System Location:
Set the AP’s network location.
 Read Community:
Indicates the community read access string to permit reading this AP’s
SNMP information.
The default is Public.
 Write Community:
Indicates the community write access string to permit reading and
re-writing this AP’s SNMP information.
The default is Private.
5.5 MAC Filter
5.5.1 MAC Filter Setting
To better manage PCs in LAN, you can use the MAC Address Filter function to allow/disallow such PCs to
access the internet via the WNAP-W2200.
Figure 5-10 MAC Filter Setting