3 wlan settings, 1 basic, Wlan settings – PLANET WNAP-W2200 User Manual

Page 29: Basic, Igure, Ireless, Asic, Ettings

User Manual of WNAP-W2200

-21-

If you change the IP Address of LAN, you must use the new IP Address to
login the AP.

When the IP address of the WNAP-W2200 is changed, the clients on the
network often need to wait for a while or even reboot before they can access
the new IP address. For an immediate access to the AP, please flush the
netbios cache on the client computer by running the “nbtstat –r” command
before using the device name of the WNAP-W2200 to access its Web
Management page.

5.3 WLAN Settings

The Wireless menu contains submenus of the settings about wireless network. Please refer to the following

sections for the details.

5.3.1 Basic

Choose menu “Wireless Settings  Basic”, and you can configure the basic settings for the wireless network
on this page. After configuration is done, please click the “Apply” button to save the settings.

Figure 5-6 Wireless Basic Settings