Example – set wlan to be wan as wifi client – PLANET WNAP-6305 User Manual
Page 94

User’s Manual of WNAP-6305
- 94 -
3. Example – set WLAN to be WAN as WiFi Client
User Mr. ABC likes to configure this WLAN Broadband Router to be a WiFi client. In order to
communicate with another AP, Mr. ABC collects information and plans the WLAN Broadband Router
implementation by the following configuration.
WiFi client:
WAN configuration: DHCP (Auto config)
IP Address
n/a
Subnet Mask
n/a
Default Gateway
n/a
Primary DNS Address
n/a
LAN configuration:
IP Address
10.10.10.254
Subnet Mask
255.255.255.0
DHCP Client Range
10.10.10.100 – 10.10.10.200
WLAN configuration:
SSID
Depend on AP
Channel Number
Depend on AP
WiFi server:
AP configuration:
SSID
Test
Channel Number
Channel 1
Wireless Encryption
WPA2
DHCP server
192.168.1.33~192.168.1.254
1) Configure the Operation Mode:
Open “Operation Mode Configuration” page and select Wireless ISP. Then click “Apply” button to
confirm the configuration setting and reboot the WLAN Broadband Router. After reboot, the wireless
LAN will become WAN interface.