PLANET WNAP-6305 - Manual (Page 45)

User’s Manual of WNAP-6305
- 45 -
Wireless Mode Click to select wireless mode from pull down menu.
SSID It is the wireless network name. The SSID can be 32 bytes long.
User can use the default SSID or change it.
Broadcast Network
Name (SSID)
Enable or disable the SSID broadcast function.
AP Isolation Wireless network is similar to the virtual local area network. All of the
Wireless client devices can access each other completely.
When you enable this function, it will turn off connection between
wireless clients. Only allows connection between wireless client and
this AP router.
MBSSID AP Isolation
Enable this function will turn off connection between clients with
different MBSSID. Example: The client connected with BSSID 1. When
enable this function, it will not connect with BSSID 2. Only can access
between clients with SSID 1.
BSSID
Show the MAC address of Wireless interface.
Frequency (Channel)
Select the wireless communication frequency/channel from pull-down
menu.
Operating Mode
Select “Mixed Mode” for 11b/g/n mode or “Green Field” for 11n mode.
Channel BandWidth
Select the operating channel width 20 MHz or 20/40 MHz.
Guard Interval
Select “Long” or “Auto”. Guard intervals are used to ensure that distinct
transmissions do not interfere with one another. Only effect under
Mixed Mode.
MCS
Select 0~7 or “Auto” from pull down menu. The default is “Auto”. Only
effect under Mixed Mode.