PLANET WNAP-6305 - Manual (Page 36)

User’s Manual of WNAP-6305
- 36 -
Figure 5-7 Step 2. Configure Wireless Settings
Object Description
Network Mode This field determines the wireless mode which the Router works on.
Frequency (Channel)
This field determines which operating frequency will be used. The
default channel is set to AutoSelect, so the router will choose the best
channel automatically. It is not necessary to change the wireless
channel unless you notice interference problems with another nearby
access point.
Network Name (SSID)
Enter a value of up to 32 characters. The same name of SSID (Service
Set Identification) must be assigned to all wireless devices in your
network. Considering your wireless network security, the default SSID
is set to be default. This value is case-sensitive. For example, PLANET
is NOT the same as planet.
Channel Bandwidth Select the operating channel width 20 MHz or 20/40 MHz.
Security Mode
 Disable: No security required
 OPENWEP / SHAREDWEP:
When you select WEP, please input 5, 13 (ASCII), 10 or 26
(HEX) characters for WEP Key.
 WPA-PSK / WPA2-PSK: You can enter ASCII characters between
8 and 63 characters or 8 to 64 Hexadecimal characters.
When you finish these settings, then click Apply button to save.