5 site survey – PLANET WNAP-6305 User Manual

Page 61

User’s Manual of WNAP-6305

- 61 -

5.4.5 Site Survey

This page is used to view or configure other APs near yours.

To connect with other APs by site survey, you need to configure the WNAP-6305 as “AP Client” mode

in the Basic Wireless Settings page shown as follows:

Step 1.

Go to “Wireless Settings-> Basic” and select the Wireless Moe to “AP Client”,

Figure 5-29 Basic Wireless Settings

Step 2.

Go to “Wireless Settings->Site Survey” to scan the AP. Select the AP that you choose to

connect, and then click “Next”.