PLANET WNAP-6305 - Manual (Page 65)

User’s Manual of WNAP-6305
- 65 -
5.4.6 WPS
This section will guide you to adding a new wireless device quickly to an existing network by WPS
(Wi-Fi Protected Setup) function.
Step 1. Choose menu “WPS” and you will see the next screen.
Figure 5-33 WPS Setup
The page includes the following fields:
Object Description
WPS Select Enable or Disable the Wi-Fi Protected Setup function. Then
click Apply button to take effect function after change.
WPS Summary After enabling the WPS function, if there is connection the WPS
Summary will show related information and status.
AP PIN Here shows the AP’s PIN code (Personal Identification Number) that
the enrollee should enter the registrar’s PIN code to make a
connection.
Click Generate button to generate a new AP PIN code.