PLANET WNAP-1110 - Manual (Page 59)

4.7.8 Password
Selecting System Tools > Password allows you to change the factory default user name and
password of the device on the screen shown in Figure 4-38.
Figure 4-38 Password
It is strongly recommended that you change the factory default user name and password of the AP.
All users who try to access the AP's web-based management page or Quick Setup will be
prompted for the AP's user name and password.

Note:
The new user name and password must not exceed 14 characters in length and must not include
any spaces. Enter the new Password twice to confirm it.
Click Save when finished.
Click Clear All to clear all.
4.7.9 System Log
Selecting System Tools > System Log allows you to query the Logs of the device on the screen
shown in Figure 4-39.
Figure 4-39 System Log
53