PLANET WNAP-1110 User Manual
Page 36
You will be reminded to reboot the device after clicking the Save button.
2) Multi-SSID
Figure 4-15 Wireless Security – Multi-SSID
Operation Mode - Shows the current operation mode. You can choose one of the 4 SSID
from the pull-down list.
Disable Security - Check this box radio button to disable wireless security. If disabled, the
wireless stations will be able to connect this AP without encryption. It is strongly
recommended that you choose one of the security types to enable security.
WPA/WPA2 - Select WPA/WPA2 based on Radius Server.
Version - You can select one of following versions.
1)
Automatic - Select WPA or WPA2 automatically based on the wireless station's
capability and request.
2)
WPA - Wi-Fi Protected Access.
3)
WPA2 - WPA version 2.
Encryption - You can select either Automatic, TKIP or AES.
Radius Server IP - Enter the IP address of the Radius Server.
Radius Port - Enter the port used by radius service.
Radius Password - Enter the password for the Radius Server.
30