PLANET ICA-HM830W - Manual (Page 59)

Step 2. Make sure that only you access this device at this moment.
Step 3. Disable Motion Detection function.
Step 4. Select “Firmware name”.
Step 5. Select the Firmware binary file.
Step 6. Once the firmware file was selected, select “Upgrade”.
Step 7. The upgrade progress inf ormation will be displaye d on the
screen.
Step 8. A message will be shown while the firmware upgraded. Once
the upgrading process complet ed, the Internet Camera will
reboot the system automatically.
Please wait for upg rade procedural finished, and th en you ca n use
PLANET IPInstaller to search the Internet Camera again.
Warning!!!
The download firmware procedure can not be interrupted. If the power and/or network
connection are broken during the download procedure, it might possibly cause serious
damage to the Internet Camera.
Please be aware that you should not turn off the power during updating the firmware and
wait for finish message.
Furthermore, do not try to upgrade new firmware if it’s not necessary.
Backup Save all parameters and user-defined scripts to backup file:
To take a backup of a ll of the parameters, click this button. If
necessary, it will then be possible to re turn to the previous settings, if
settings are changed and there is unexpected behavior.
Upload setting Specify the backup file to use:
Click the “Browse” button to locate the saved backup file and then click
the “Restore Setting” button. The settings will be restored to the
previous configuration.
Add Language Choose language:
The Internet Camera could provide multiple languages to m eet
customer’s requirement.
Select language file to upload:
User can manually update other language into IP camera through
language file upload.