PLANET ICA-HM830W - Manual (Page 51)

55B
3.8.3 Network SMTP Settings
You may setup SMTP mail param eters for further operation of Event Schedul e. That’s, if users
want to send the alarm m essage out, it will need to configure parameters here and also add at
least one event schedule to enable event triggering.
SMTP (email) Setting Mail Server:
Type the SMTP server name or the IP address of the SMTP server.
Server Port:
Set port number of SMTP service.(The default value is 25)
Authentication:
Select the authentication required when you send an e-mail.
User Name:
Type the user name for the SMTP server if Authentication is Enable.
Password:
Type the password for the SMTP server if Authentication is Enable.
From (Email Address):
Type the se nder’s E-mail address. This address is used for reply
e-mails.
Test Send test email to:
Send a test mail to mail server to check this account is available or not.