PLANET ICA-HM220W - Manual (Page 58)

57
The descriptions of every setting in this menu will be given below:
Enable Motion Detection Select “Enable” to enable motion detection, and select Disable
to disable this function.
Motion Detection Interval Select the time interval between two motions from dropdown
menu. When a motion is detected, camera will not detect any
motion again within the time interval you specified here. Available
options are from 0 second (always detect new motion) to 60
seconds.
Recording Time Select the duration you wish this camera to record image when a
motion is detected from dropdown menu. Available options are 1,
2, 3, 4, and 5 (seconds).
Sending File Type Select the file type that will be saved when a motion is detected.
Select “JPEG” and a still picture in JPEG format will be saved;
and select AVI to save a motion video clip.
Send snapshot file to FTP Select “Enable” to send the saved file to appointed FTP server
when a motion is detected, select’ Disable’ to disable this function.
You have to configure FTP server parameters in
FTP Configuration menu first, so this function will take effect
(see below).
Send snapshot file to
E-Mail Select “Enable” to send the saved file to appointed E-mail
address when a motion is detected, select Disable to disable this
function. You have to configure mail server parameters in ‘FTP
Configuration’ menu first, so this function will take effect (see
below).
Send snapshot file to SD
Card Select “Enable” to send the saved file to SD card when a motion
is detected, select Disable to disable this function. You have to
insert a working SD card into the SD slot of this camera first, so
this function will take effect.
Storage File Type Select saving file type for motion detection: JPEG (still picture) or
AVI MPEG4 / AVI H264 (for motion picture).
Record File Size Input the maximum file size of saved file in Mbytes. Maximum file
size is 100.
Record to Folder Select “Enable” to save file to a network folder which supports
SAMBA (also known as ‘Windows Network Neighborhood’), select
‘Disable’ to disable this function.
Authentication If username and password are not required to write files in
specified folder, select ‘Anonymous’; if required, select ‘Account’.
User Name Input user name required by destination network folder.
Password Input password of the user name required by destination network
folder.