A.5 fiber optical cable connection parameter, A.6 power information, Iber – PLANET ICS-102 User Manual
Page 72: Ptical, Able, Onnection, Arameter, Ower, Nformation
User’s Manual of ICS-10x
-67-
A.5 Fiber Optical Cable Connection Parameter
The wiring details are as below:
■
Fiber Optical patch Cables: (For ICS-102 / ICS-102S / ICS-105A)
Model Standard
Fiber
Type Cable
Specification
ICS-102
100Base-FX
Wavelength (1300nm)
Multi-mode 50/125μm or 62.5/125μm
ICS-102S
100Base-FX
Wavelength (1310nm)
Single-mode 9/125μm
ICS-105A
100Base-FX
Wavelength (Depend on SFP module)
Multi-mode
Single-mode
50/125μm or 62.5/125μm
9/125μm
A.6 Power Information
The power jack of ICS-10X is with 2.5mm in the central post and required +5VDC power input. It will conform to the
bundled AC-DC adapter and Planet’s Media Chassis. Should you have the problem to make the power connection, please
contact your local sales representative.
Please keep the AC-DC adapter as spare parts when your ICS-10X is installed to a Media Chassis.
2.5mm
DC Receptacle 2.5mm
+5V for each slot
DC receptacle is 2.5mm wide that conforms to and matches the Media Converter 2.5mm DC
jack's central post. Do not install any improper unit, model of the Media Converter
2080-AA3600-005