PLANET HPOE-1200G - Manual (Page 25)

User’s Manual of HPOE-1200G / HPOE2400G
25
4.3.2 IP Configuration
This section provides the IP Configuration of PoE Injector Hub, the screen in Figure 4-3-2 appears and Table 4-3-2
describes the IP Configuration object of PoE Injector Hub.
Figure 4-3-2: IP Configuration Web page screen
Object Description
• DHCP Client Allow disable or enable the DHCP Client function of PoE Injector Hub.
• IP Address
Allow input new IP Address of PoE Injector Hub.
• Subnet Mask Allow input new Subnet Mask Address of PoE Injector Hub.
• Default Gateway
Allow input new Default Gateway Address of PoE Injector Hub.
• Description
Allow input new system description of PoE Injector Hub, the maximum length is
20 characters.
• Apply
Press this button to take effect.
• Reset Press this button for resets not apply IP Configuration to default mode.
Table 4-3-2: Descriptions of the IP Configuration Web page screen Objects
If PoE Injector Hub didn’t receive IP address from DHCP server then user still can connect to the IP address
before change to DHCP client mode, or user can use Smart Discovery Utility to find out what is IP address
set in the PoE Injector Hub currently.