PLANET HPOE-1200G - Manual (Page 23)

User’s Manual of HPOE-1200G / HPOE2400G
23
4.2 Web Panel
At the top of the Web management page, the active panel displays the link status of management port and PoE ports.
Figure 4-2-1: Web panel screen
 Green lit is the network data send or receiver.
 Orange lit is the PoE in use.
 Red lit is the PoE port not enough power to enable. (It will be happened that if user assigned lower power
for PD in the Total Limit mode.)
4.3 System
The System function provides system information also allows user to manage PoE Injector Hub system. As showed in
Figure 4-2-2 .
Figure 4-2-2: System function menu
The page includes the following information:
Object Description
• System Information
Display the MAC address, Software Version, Hardware Version, IP Address,
Subnet Mask, Gateway and Description. Explained in section 4.3.1 .
• IP Configuration
Allow to change the IP subnet address of PoE Injector Hub. Explained in
section 4.3.2 .
• NTP Configuration
Allow to set system time by manual or synchronize system time from Internet
NTP server. Explained in section 4.3.3 .
• Password Setting
Allow to change the username and password of PoE Injector Hub. Explained in
section 4.3.4 .
• Firmware Upgrade Allow to upgrade the latest firmware in the future. Explained in section 4.3.5 .