PLANET HPOE-1200G - Manual (Page 19)

User’s Manual of HPOE-1200G / HPOE2400G
19
3.3 Management Method
User can manage the PoE injector Hub by Web Management via a network connection.
3.3.1 Web Management
The PoE Injector Hub can be configured through an Ethernet connection, the factory default IP address is 192.168.0.100
with subnet mask 255.255.255.0, so please make sure the manager PC must be set on the same IP subnet address. For
example, if POE Injector Hub IP address is keeps factory default then your manager PC should be set 192.168.0.x (where
x is a number between 1 and 254, except 100) with subnet mask 255.255.255.0.
1. Use Internet Explorer 7.0 or above Web browser. Enter IP address http://192.168.0.100 to access the Web interface.
Figure 3-1-1: Web Management over Ethernet
2. When the following login screen appears, please enter the default username "admin" and password “admin” to login
the main screen of PoE Injector Hub. The login screen in Figure 3-1-2 appears.
Default IP Address: 192.168.0.100
Default Account: admin
Default Password: admin
Figure 3-1-2: PoE Injector Hub Web Login screen