PLANET EPL-1000 - Manual (Page 11)

11
Mini-GBIC (SFP) Interface
Prepare a proper SFP module and install it into the optical trunk port. Then you can
connect fiber optics cabling that uses LC connectors or SC connectors (with the use
of an optional SC-to-LC adapter) to the fiber optics connector on the uplink port.
Fiber optics cable with LC duplex connector
Connecting optical fiber to the trunk port
Warning
Never look directly at the transmitting ports of optical interface that
might be emitting laser, in order to prevent damage to the eye
from the laser radiation.
RJ-45 Electrical Interface
The pin assignment of RJ-45 connector on the Uplink port is shown in the following
figure and table.
1,2 T/Rx+,T/Rx-
3,6 T/Rx+,T/Rx-
4,5 T/Rx+,T/Rx-
7,8 T/Rx+,T/Rx-