Lacp enabled – PLANET VC-2400MR48 User Manual
Page 92
User’s Manual of VC-820M / VC-2400MR Series
LACP enabled
Having set up the aggregator setting with LACP enabled, you will see the trunking group information between two switches
on the tab of Aggregator Information.
Switch 1 configuration
1. Set
System Priority
of the trunk group. The default is 32768.
2. Select
a
trunk group ID
by pull down the drop-down menu bar.
3. Enable LACP.
4.
Include the member ports by clicking the Add button after selecting the port number and the column field of
Work Ports
changes automatically.
Figure 4-5-4:
Aggregation Information of
Switch 1
5.
Click on the tab of Aggregator Information to check the trunked group information as the illustration shown
above after the two switches configured.
Switch 2 configuration
6. Set
System Priority
of the trunk group. For example: 1.
7. Select
a
trunk group ID
by pull down the drop-down menu bar.
8. Enable
LACP.
9. Include the member ports by clicking the Add button after selecting the port number and the column field of
Work Ports
changes automatically.
92