PLANET VC-2400MR48 - Manual (Page 31)

User’s Manual of VC-820M / VC-2400MR Series
„ VC-820M VDSL2 connection
The VDSL2 port of VC-820M uses eight RJ-11 connectors which can be just directly connected to the remote CPEs through
existing telephone lines.
Figure 2-3-4: VC-820M VDSL2 connection
If the port is connected but the relevant LED is dark, check the following items:
1. The VDSL2 Switch and the connected device’s power are on or not.
2. The connecting cable is good and with correct type.
3. The cable is firmly seated in its connectors in the Managed Switch and in the associated device.
4. The connecting device, including any network adapter is well installed and functioning.
5. Confirm the CPE (VC-230 / VC-231 / VC-234) is set to CPE mode. Check the DIP switch at the rear panel.
6. Confirm the CPE (VC-231 / VC-234) device is implemented within the scope of operative without interference.
31