2 lacp command, No] lacp, Lacp system-priority – PLANET VC-2400MR48 User Manual
Page 159: No lacp system-priority, Show lacp status
User’s Manual of VC-820M / VC-2400MR Series
159
6.4.2 LACP Command
[no] lacp
Description:
Enable/disable LACP.
lacp system-priority
Description:
Set LACP system priority.
Syntax:
lacp system-priority <1..65535>
Parameters:
<1..65535>
specifies the LACP system priority.
no lacp system-priority
Description:
Set LACP system priority to the default value 32768.
show lacp status
Description:
Show LACP enable/disable status and system priority.
Switch(config)# show lacp status
LACP is enabled.
LACP system priority: 32768