14 igmp, No snmp trap, Show snmp trap – PLANET VC-2400MR48 User Manual
Page 185: No] igmp, No] igmp fastleave
User’s Manual of VC-820M / VC-2400MR Series
185
Parameters:
<ip-addr> specifies the IP address.
<community-str> specifies the community string.
<1..65535> specifies the trap receiver port number. Default value is 162 if not specified.
e.g. snmp trap 192.168.200.1 public
no snmp trap
Description:
Remove trap receiver IP address and port number.
Syntax:
no snmp trap
<ip-addr> [<1..65535>]
Parameters:
<ip-addr> specifies the IP address.
<1..65535> specifies the trap receiver port number.
e.g. no snmp trap 192.168.200.1
show snmp trap
Description:
Show all trap receivers.
6.14 IGMP
The Internet Group Management Protocol (IGMP) is an internal protocol of the Internet Protocol (IP) suite.
[no] igmp
Description:
Enable/disable IGMP snooping.
Syntax:
[no] igmp
[no] igmp fastleave
Description:
Enable/disable IGMP snooping fast leave. If enable, switch will fast delete member who send leave report,
else wait one sec.
Syntax:
[no] igmp fastleave