PLANET VC-2400MR48 - Manual (Page 15)

User’s Manual of VC-820M / VC-2400MR Series
15
。 1000Base-T: 4-pair UTP Cat 5E, up to 100m
。 1000Base-SX: 50/125μm and 62.5/125μm fiber-optic cable, up to 550m
。 1000Base-LX: 9/125μm fiber optic cable, from 10km to 120km
VDSL2
VDSL2 Standard
Comply with ITU-T G.993.1 and G.993.2.
Supports provisioning the VDSL optional band (25K to 138K Hz) usage
Band Plan
Selectable band plan for each VDSL line on a per port basis
Band plan A:
-
Profile 998, Annex A of G.993.1
Band plan B:
-
Profile 997, Annex B of G.993.1
Profile
Selectable spectrum profile of 8a/b/c/d, 12a/b, 17a, and 30a for frequency bands (Annex
A, B and C) defined in G.993.2
Encoding VDSL-DMT
Performance / Distance
(Based on AWG26 wires)
• Full VDSL2 Down Stream / Up Stream bandwidth up to:
。
VDSL2 Features
Selectable rate limit control
Selectable target SNR (Signal to Noise Ratio) mode
POTS voices pass through
Layer 2 Function
Management Interface Console, Telnet, Web Browser, SSL, SNMPv1/v2c/v3
Gigabit Port Configuration
Port disable/enable
Auto-negotiation
10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Gigabit Port Status
Display each port’s speed duplex mode, link status and Flow control status.
Auto negotiation status, trunk status.
Port Mirroring
TX / RX / Both
1 to 1 monitor
Bandwidth Control
Ingress / Egress rate limit control
Gigabit Port:
• Allow to configure per 128Kbps
VDSL2 Port:
• Allow to configure per 5Mbps
VLAN
IEEE 802.1Q Tag-based VLAN, up to 255 VLANs groups, out of 4041 VLAN IDs
Port-based VLAN
GVRP
Q-in-Q tunneling
Private VLAN Edge(PVE / Protected port) with two protected port groups
Link Aggregation
Static Port Trunk
IEEE 802.3ad LACP (Link Aggregation Control Protocol)
Supports 13 groups of 8-Port trunk support
QoS
4 priority queue
Traffic classification based on:
- Port priority
- 802.1p priority
- DSCP/TOS field in IP Packet