PLANET GS-5220-16S8C - Manual (Page 183)

User’s Manual of GS-5220 Series
4.9.7 Port DSCP
This Page allows you to configure the basic QoS Port DSCP Configuration settings for all switch ports. The Port DSCP screen in
Figure 4-9-8 appears.
Figure 4-9-8: QoS Port DSCP Configuration Page Screenshot
The Page includes the following fields:
Object Description
The Port coulmn shows the list of ports for which you can configure dscp ingress
and egress settings.
 Port
In Ingress settings you can change ingress translation and classification settings
for individual ports.
There are two configuration parameters available in Ingress:
 Translate
 Classify
 Ingress
To Enable the Ingress Translation click the checkbox.  Translate
Classification for a port have 4 different values.
 Disable: No Ingress DSCP Classification.
 DSCP=0: Classify if incoming (or translated if enabled) DSCP is 0.
 Selected: Classify only selected DSCP for which classification is enabled
as specified in DSCP Translation window for the specific DSCP.
 All: Classify all DSCP.
 Classify

Egress Port Egress Rewriting can be one of -
 Disable: No Egress rewrite.
 Enable: Rewrite enable without remapped.
 Remap DP Unaware: DSCP from analyzer is remapped and frame is
183