PLANET GS-5220-16S8C - Manual (Page 16)

User’s Manual of GS-5220 Series
1.5 Product Specifications
GS-5220-16S8C / GS-5220-16S8CR
Product GS-5220-16S8C GS-5220-16S8CR
Hardware Specifications
Copper Ports 8 10/ 100/1000BASE-T RJ45 Auto-MDI/MDI-X ports, shared with Port-1~Port-8
SFP/mini-GBIC Slots 24 100/1000BASE-X Dual Speed SFP interfaces
Console 1 x RS232-to-RJ45 serial port (115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 48Gbps / non-blocking
Throughput 35.7Mpps@64Bytes
Address Table 16K entries, automatic source address learning and ageing
Share Data Buffer 16M bits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10K bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Dimensions (W x D x H) 440 x 200 x 44.5 mm, 1U height
Weight 2745g
Power Requirements – AC AC 100~240V, 50/60Hz
Power Requirements – DC ---
48V DC @ 0.6A nominal voltage
Operating Range: 36 ~ 60V DC
Power Consumption 45 watts / 153 BTU ( max.)
ESD Protection
6KV DC
Layer 2 Functions
Port Configuration
Port disable / enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable / enable
Port Status
Display each port’s speed duplex mode, link status, flow control status,
auto-negotiation status, trunk status
Port Mirroring
TX / RX / Both
Many-to-1 monitor
VLAN
802.1Q agged based VLAN
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
IP Subnet-based VLAN
MVR (Multicast VLAN registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
Link Aggregation
IEEE 802.3ad LACP / static trunk
12 groups of 8-port trunk supported
Spanning Tree Protocol STP, IEEE 802.1D Spanning Tree Protocol
16