PLANET FGSW-2402PVS - Manual (Page 35)

31
" / -'& %
This function allows to enabling the port-based VLAN function. The screen in figure 4-8 appears.
Figure 4-8 VLAN Configuration Screen
After setup is completed. Press "Apply" button for enable the port-based VLAN. The screen in figure 4- 9
appears
Figure 4-9 VLAN Configuration Screen
Press “Add NEW” to create a new port-based VLAN group. The screen in figure 4-10 appears.
Note: Up to 26 port-based VLAN groups can be added and the group ID range is 1-255.
Figure 4-10 VLAN Configuration Screen
After setup is completed. Press "Apply" button for save the current configuration. The screen in figure 4- 11
appears with message “Operation completed successfully!”