PLANET FGSW-2402PVS User Manual
Page 24
20
,
%
Press 8
on your keyboard or use the
"TAB"
key to move the highlight to the
Misc Configuration
and press
“Enter”
to access the screen of
Misc Configuration
from the
Main Menu screen
(please see the figure 3-4).
Table 3-10 shows the descriptions of the
Misc Configuration
screen Objects. The screen of
Misc
Configuration
in figure 3-32 appears.
Figure 3-32
Misc Configuration Screen
O Object
Description
Advanced Switch
Configuration
Allow user to configure the advanced Switch configuration. Please refer to chapter
3.2.10.1.
Password Setting
Allow user to disable or enable password protection. Set the username and
password, Maximum up to 8 characters. Please refer to chapter 3.2.10.2.
Reset System Default
Setting
Allow user to reset the Switch to default mode. Please refer to chapter 3.2.10.3.
Reboot System
Allow user to reboot the Switch. Please refer to chapter 3.2.10.4.
System Information
Display the firmware and web page version. Please refer to chapter 3.2.10.5.
IP Configuration
Allow user to set the IP address, subnet mask and Default gateway. Please refer to
chapter 3.2.10.6.
Return to Main Menu
Allow return to the Console Main Menu. Please refer to chapter 3.2.10.7.
Table 3-10
Descriptions of the Switch Information screen Objects
3.2.10.1 Advanced Switch Configuration
Press 1
on your keyboard or use the
"TAB"
key to move the highlight to the
Advanced Switch Configuration
and press
“Enter”
to access the screen of
Advanced Switch Configuration
from the
Misc Configuration
screen
(please see the figure 3-32).
Table 3-11 shows the descriptions of the
Advanced Switch Configuration
screen Objects. Use the
"TAB"
key to choose the
, then start to modify these settings. The screen of
Advanced Switch Configuration
in figure 3-33 appears.
Figure 3-33
Advanced Switch Configuration Screen