Avago Technologies MegaRAID SAS 9341-4i - Manual (Page 43)

Avago Technologies
- 43 -
MegaRAID SAS Device Driver Installation User Guide
June 2015 Solaris Driver Installation
Contents of the Driver Distribution
Chapter 8: Solaris Driver Installation
This chapter describes how to use the MegaRAID SAS Driver Package Update to install the Avago MegaRAID controller
driver for the Solaris OS. The following topics are documented:
 Contents of the driver distribution
 Supported hardware
 Supported operating system
 Installing the driver package during OS installation
 Installing or upgrading the driver package after OS installation
 Removing the driver package
 Notes
NOTE Section 8.4, Installing the Driver Package during OS Installation
(Solaris10 OS, x86 Only)
and Section 8.5, Installing the Driver Package
during Operating System Installation (Solaris11 OS, x86 Only) , apply to
the x86 architecture only. The other sections apply to both x86
architecture and SPARC architecture.
8.1 Contents of the Driver Distribution
The driver distribution contains the following files
 README – Driver readme file
 mr_sas.img – 3.5-in. 1.44-MB diskette image
 mr_sas.iso – CD-ROM image
 mr_sas.tar.Z – Package image
8.2 Supported Hardware
This driver supports the following Avago MegaRAID controllers:
 The 2108-based family of MegaRAID controllers
 The 2208-based family of MegaRAID controllers
 The 3108-based family of MegaRAID controllers
8.3 Supported Operating Systems
This driver supports the Solaris 10 and Solaris 11 OSs on both the x86 platform and the SPARC platform. The following
driver binaries (built natively) are included in this driver distribution (
.zip file) and the corresponding supported OSs.
 Solaris 11 and Solaris 11-U1 (x86) OSs
Use the driver package under the directory intel/solaris11/.
 Solaris 10-U9 and Solaris 10-U10 (x86) OSs
Use the driver package under the directory intel/solaris10-u9/.