Avago Technologies MegaRAID SAS 9341-4i - Manual (Page 31)

Avago Technologies
- 31 -
MegaRAID SAS Device Driver Installation User Guide
June 2015 Ubuntu Linux Driver Installation
Removing the Driver in a New Ubuntu Linux LTS OS
5.2 Removing the Driver in a New Ubuntu Linux LTS OS
To remove the device driver in an Ubuntu Linux system, perform the following procedure if the Ubuntu Linux OS boots
from a device that is not managed by a MegaRAID controller, but in which the MegaRAID controller is or will be present
on the system and used for managing secondary storage.
1. If you are running the OS as root, perform the following steps; otherwise, go to step 2:
a. Make sure that you are running the OS as root. To do so, if you are logged in as a standard user, type the
following command and press Enter:
sudo su
You are prompted for the password.
b. Provide the password and press Enter.
c. In the directory where the MegaRAID SAS driver package is located, type the following command and
press Enter:
$dpkg -r megaraid-sas
This action removes the driver from the Ubuntu OS.
2. Perform the following steps if you are not running the OS as root:
a. In the directory where the MegaRAID SAS driver package is located, type the following command and
press Enter:
sudo $dpkg -r megaraid-sas
You are prompted for the password.
b. Provide the password and press Enter.
This action removes the driver from the Ubuntu OS.