Avago Technologies MegaRAID SAS 9286CV-8eCC - Manual (Page 13)

LSI Corporation
- 13 -
MegaRAID SAS 9286CV-8eCC RAID Controller Quick Installation Guide
June 2012 MegaRAID SAS 9286CV-8eCC RAID Controller Quick Installation Guide
4.2.4 Attaching the CVPM02 Module to the Clip on the Remote Mount Board
Follow these steps to attach the CVPM02 module to the clip on the remote mount board.
1. With the remote mount board on a flat, clean, static-free surface, ground yourself, and make sure that the system
is grounded.
2. Remove the CVPM02 module from the package.
3. Press the CVPM02 module into the clip on the remote mount board until the module clicks firmly into place, as
shown in the following figure.
Figure 7 Attaching the CVPM02 Module to the Clip on the Remote Mount Board
&DFKH9DXOW
3RZHU0RGXOH
&OLS
B