Epson R-D1 - Manual (Page 42)

38 Using the LCD Monitor
Chapter 4
Using the LCD Monitor
How to Use the LCD Monitor
You can use the LCD monitor to view photos in the playback mode or
make settings for the camera functions. When using the LCD monitor,
invert it toward you and press the LCD button. To invert the LCD
monitor, insert your finger tip into the dent on the side of the monitor
to open the LCD monitor 90° (1). Then rotate it 180° (2) and turn the
monitor 90° again (3).
c Caution:
❏ Do not operate or leave the LCD monitor while it is opened.
❏ Do not grab the LCD monitor or lift it up while holding it.
Note:
❏ When you turn the power switch on while the LCD monitor is inverted
toward you, the camera enters the playback mode.
❏ When you perform one of the following in the playback mode, the LCD
monitor is turned off and the camera returns to the shooting mode.
- Press the LCD button
- Press the shutter-release button halfway
- Invert the LCD monitor
Menu structure
In the playback mode, you can specify camera settings with various
menus. To navigate through the menus or functions, use the JOG dial
and buttons next to the LCD monitor.
DUMMY
Dent
LCD button: Switches from the shooting mode to playback
mode, or vice versa.
MENU button: Displays the Main menu on the LCD monitor.
ENTER button: Used when you determine the currently selected
value or option (or display sub menu items).
LCD
MENU
ENTER
CANCEL
USER