Epson R-D1 - Manual (Page 28)

24 Taking Pictures
3. Maneuver the shutter charge lever.
4. Focus on the subject.
5. Press the shutter-release button all the way down.
Shutter speed is automatically set in an appropriate exposure, and
a picture is taken.
Note:
❏ When you set NR (Noise Reduction) to Hi (High) in the Film Settings
screen and set the exposure at more than 2 seconds, noise reduction is
automatically performed after taking a photo. While the noise reduction
is being performed, do not turn the power off until the SD card access LED
is unlit. If you turn the power off before the noise reduction procedure is
complete, the image before the noise reduction is saved.
❏ For brighter subjects, fast moving subjects or with a higher value film
speed, a higher shutter speed is recommended.
❏ You can take photos locking the aperture value manually. For details, see
“Setting Manual Aperture Locking” on page 26.
Exposure compensation
Exposure compensation is used to alter the exposure suggested by the
camera. Exposure can be set between AE -2.0 EV (underexposure) and
AE +2.0 EV (overexposure).
You can change exposure compensation using the shutter speed dial.
Background is much brighter than the
main subject Select positive values
Background is much darker than the main
subject Select negative values