Appendix a - scpi common command/query definitions, A.1 introduction, Table a-1. ieee 488.2 command/query index – KEPCO TMA 4882-27 User Manual

Page 47: A.2 cls — clear status command, A.3 ese — standard event status enable command, A.4 *ese? — standard event status enable query

TMA4882-27 021910

A-1

APPENDIX A - SCPI COMMON COMMAND/QUERY DEFINITIONS

A.1

INTRODUCTION

This appendix defines the IEEE 488.2 common commands and queries used with the TMA
4882-27 Controller. Common commands and queries are preceded by an asterisk (*) and are
defined and explained in Figures A-1 through A-14, arranged in alphabetical order. Table A-1
provides a quick reference of all IEEE 488.2 common commands and queries used in the TMA
4882-27 Controller.

A.2

*CLS — CLEAR STATUS COMMAND

*CLS

Syntax:

*CLS

Description: Clears status data. Clears the error queue of the instrument. It also clears the following registers

without affecting the corresponding Enable Registers: Standard Event Status Register (ESR), Opera-
tion Status Event Register, Questionable Status Event Register, and Status Byte Register (STB).
Related commands: *OPC, *OPC?. (See example, Figure A-1.)

A.3

*ESE — STANDARD EVENT STATUS ENABLE COMMAND

*ESE

Syntax:

*ESE where = positive whole number: 0 to 255 per Table A-2.
Default Value: 0

Description: This command programs the standard Event Status Enable register bits. The contents function

as a mask to determine which events of the Event Status Register (ESR) are allowed to set the ESB
(Event Summary Bit) of the Status Byte Register. Enables the Standard events to be summarized in
the Status Byte register (1 = set = enable function, 0 = reset = disable function). All of the enabled
events of the standard Event Status Enable register are logically OR-ed to cause ESB (bit 5) of the
Status Byte Register to be set (1 = set = enable, 0 = reset = disable)

(See example, Figure A-1.)

A.4

*ESE? — STANDARD EVENT STATUS ENABLE QUERY

*ESE?

Syntax:

*ESE?

Return value: Integer> value per Table A-2.

TABLE A-1. IEEE 488.2 COMMAND/QUERY INDEX

COMMAND

PAR.

COMMAND

PAR.