KEPCO HSM Series - Manual (Page 12)

1-6
HSMSERIES OPR 052912
1.5 OPTIONS
HSM options are described below:
1.5.1 BATTERY CHARGER (B SUFFIX): The battery charger option incorporates an expanded
window for the output voltage fault detector compatible with normal battery operating voltages.
1.6 ACCESSORIES
Accessories for HSM Power Supplies are listed in Table 1-3.
TABLE 1-3. ACCESSORIES
ACCESSORY
PART
NUMBER
USE
RACK
ADAPTERS
RA 58
Accommodates up to three Power Supplies in a 19-inch rack. Used for hard-wired applications
only.
RA 61
Same as RA 58 except accommodates up to four Power Supplies in a 24-inch rack for hard-
wired applications.
RACK
ADAPTER
OPTIONS
-23E
Incorporates wider mounting ears to accommodate a 23-inch rack; available for all 19-inch rack
adapters above.
-24E
Incorporates wider mounting ears to accommodate a 24-inch rack; available for all 19-inch rack
adapters above.
SERIES
CLAMPING
DIODES
124-0600
Used with HSM 24V, 28V and 48V models when wired for series operation. User must provide
wiring and heat sink. One diode required for each power supply. See PAR.2.7.5.3. May also be
used as optional external blocking diode for redundant applications. See PAR. 2.7.5.4.
124-0601
Used with HSM 3.3V, 5V, 12V and 15V models when wired for series operation. User must pro-
vide wiring and heat sink. One diode required for each power supply. See PAR. 2.7.5.3. May
also be used as optional external blocking diode for redundant applications. See PAR. 2.7.5.4.
CONNECTORS
142-0422* I/O connector mating plug
142-0381* Source power inlet connector mating plug (IEC 320-C19)
118-0776 North American linecord set (NEMA 5-20P to IEC 320-C19)
108-0294 I/O connector backshell
108-0203 I/O connector jackposts (set of two)
FIXED
INSTALLATION
KIT
219-0240
Standard - Kit consists of North American linecord set, I/O connector mating plug, I/O connec-
tor backshell, I/O connector jackposts, and screws for fixed mounting.
219-0249
Customer-wired - Same as Standard Kit (Part No. 219-240), except linecord is replaced with
user-wired AC power inlet mating plug.
SCREW 101-0159 Used for fixed mounting of HSM Power Supply (#6-20, 0.625 in. long).
* Item (quantity 1) supplied with unit.