KEPCO BHK-MG VISA Driver Manual (Both Full and 1/2 Rack) - Manual (Page 8)

8
BHK-MG-VISA 010906
FIGURE 3. MAIN PANEL WINDOW (FULL RACK)
2.2 MAIN PANEL
The main panel window allows access to all power supply parameters without having to execute local con-
trols and read the corresponding display. The main panel is a real-time display of output values and pro-
grammed parameters. All functions are available from the main panel.
The operating mode (CV or CC); Mode indicators light to indicate whether the power supply is operating in
either CV (constant voltage) or CC (constant current) mode.
The analog meters read actual output voltage and current; Two windows beneath the meters are provided
to enter voltage and current setpoints.
2.2.1 (FULL RACK ONLY) The Range switch selects the current range, either High or Low.
2.2.2 The Output button applies the programmed settings to the output terminals when set to ON or
keeps the output voltage at zero and current at minimum when set to OFF.
2.2.3 Set Voltage and Set Current windows are used to program the output voltage and current for the
unit; settings can be changed either by clicking on the arrows to the left of the display window, or by using
the mouse to highlight the setting, then typing in the new value.
2.2.4 The Protection button opens the Protection Window (Figure 4) which allows changing of the over-
voltage and overcurrent settings.
FIGURE 4. PROTECTION WINDOW
2.2.5 The Store/Recall button displays the Store/Recall window (Figure 5which can be used to store or
recall up to 40 different power supply settings. After selecting a location, the Store button saves the follow-