KEPCO BHK-MG VISA Driver Manual (Both Full and 1/2 Rack) - Manual (Page 13)

BHK-MG-VISA 010906
13
2.2.10.9.4 Pattern Generation, Example 2. To generate a 100 point voltage complex waveform com-
prised of 1/4 cycle sine wave and 1/4 cycle triangle wave with an amplitude of 10 volt peak to peak riding
on 0 volt level, a fixed current of 1 mA, and a total duration of 1 second, enter the parameters listed in
Table 4.
TABLE 3. PATTERN GENERATION, EXAMPLE 1
PARAMETER ENTER RESULT
Destination VOLTAGE Press GENERATE button after all parameters entered to
add 100 points to list which will produce the following out-
put:
Waveform SINE
Frequency (Hz) 1.000
Start Angle 0.000
End Angle 360.000
Amplitude (p-p) 1.000
Waveform Offset 28.000
Current 0.001000
Points 100
TABLE 4. PATTERN GENERATION. EXAMPLE 2
STEP PARAMETER ENTER RESULT
1
Destination VOLTAGE Press GENERATE button after all parameters entered to
add first 50 points to the list:
Waveform SINE
Frequency (Hz) 2.000
Start Angle 0.000
End Angle 90.000
Amplitude (p-p) 20.000
Waveform Offset 0.000
Current 0.001000
Points 50
2
Destination VOLTAGE Press GENERATE button after all parameters entered to
add second 50 points to list which will produce the following
output:
Waveform TRIANGLE
Frequency (Hz) 2.000
Start Angle 90.000
End Angle 180.000
Amplitude (p-p) 20.000
Waveform Offset 0.000
Current 0.001000
Points 50