KEPCO BHK-MG VISA Driver Manual (Both Full and 1/2 Rack) - Manual (Page 16)

16
BHK-MG-VISA 010906
3. PROGRAMMING EXAMPLES.
The following examples show the functions needed to set voltage to 15V, current to 2 Ma and output ON.
3.1 EXAMPLE 1:
ViByte ps_type;
ViSession BHK_Session;
Kpbhk_init ("GPIB0::6", 1, &ps_type, &BHK_Session); //init ps
Kpbhk_Set_Volt_Curr (BHK_Session, 15, 0.002);
//voltage and current
Kpbhk_OutputOnOff ( BHK_Session, 1); //output on
3.2 EXAMPLE 2:
ViByte ps_type;
ViSession BHK_Session;
Kpbhk_init ("GPIB0::6", 1, &ps_type, &BHK_Session); //init ps
Kpbhk_SetValue (BHK_Session, 0, 15);
//voltage
Kpbhk_SetValue (BHK_Session, 1, 0.002); //current
Kpbhk_OutputOnOff ( BHK_Session, 1); //output on