KEPCO BHK-MG VISA Driver Manual (Both Full and 1/2 Rack) - Manual (Page 10)

10
BHK-MG-VISA 010906
2.2.8 The ABOUT button displays the model, serial number, calibration date, firmware version number
and driver version number. Click OK to close the window
FIGURE 9. ABOUT WINDOW
2.2.9 The Limits button opens the Limits window (Figure 10).
FIGURE 10. LIMITS WINDOW
2.2.10 Running or generating a program (pattern) is accomplished by clicking the Program button on the
Main Panel, opening the Program Lists window (Figure 11). Programs can either be defined point-by-point
using the Pattern Generator Open button, or by using the Pattern Import File Select button to import a
file containing the program parameters.
2.2.10.1 The Pattern Generator Open button opens the Pattern Generation Window (Figure 13); the Pat-
tern Execution Open button opens the Pattern Execution window (Figure 14).
FIGURE 11. PROGRAM LISTS WINDOW
2.2.10.2 Patterns can be imported in comma-delineated text format using the Pattern Import File Select
button (Figure 11). The format, showing a single data point, is illustrated in Figure 12 and defined as fol-
lows:
2.2.10.3 The first line is a header, that defines columns (separated by commas) with a corresponding
parameter. The column with a “C” or “c” is defined as Current, “V” or “v” is defined as voltage, “D” or “d” is
defined as Dwell Time followed by (CR,LF). The second line defines the first data point, with data sepa-
rated by commas (in the same order as defined by the header), followed by (CR,LF). Additional data lines