TA Triumph-Adler P-C3560i MFP - Manual (Page 285)

8-28
Setup and Registration (System Menu) > System Menu
Item Description
Protocol Detail ―
NetBEUI Selects whether or not to receive documents using NetBEUI. *1
Value : Off, On
*1 The setting will be changed after restarting the device or the network for the machine.
LPD Select whether or not to receive documents using LPD.
*1
Value : Off, On
SMTP (E-mail TX) Select whether or not to send e-mail using SMTP.
Value : Off, On
POP3 (E-mail RX) Select whether or not to receive e-mail using POP3.
Value : Off, On
FTP Client
(Transmission) Select whether or not to send documents using FTP. When selecting [On], set the FTP Port
Number. Use the FTP default port 21.
Value : Off, On (Port Number: 1-65535)
FTP Server (Reception) Select whether or not to receive documents using FTP. *1
Value : Off, On
SMB Client
(Transmission) Select whether or not to send documents using SMB. When selecting [On], set the SMB default
Port Number. Use the SMB default port 445.
Value : Off, On (Port Number: 1-65535)
LDAP Select whether or not to use LDAP.
Value : Off, On
SNMP Select whether or not to communicate using SNMP. *1
Value : Off, On
SNMPv3 Select whether or not to communicate using SNMPv3. *1
Value : Off, On
HTTP Select whether or not to communicate using HTTP. *1
Value : Off, On
HTTPS Select whether or not to communicate using HTTPS. *1 *2
Value : Off, On
*2 Set "SSL" to [On] in "Secure Protocol".
Secure Protocol (page 8-30)
IPP Select whether or not to receive documents using IPP. When selecting [On], set the IPP default
Port Number. Use the IPP default port 631.
*1 *2
Value : Off, On (Port Number: 1-32767)
IPP over SSL Select whether or not to use IPP over SSL. When selecting [On], set the IPP over SSL default
Port Number. Use the IPP over SSL default port 443.
*1 *2
Value : Off, On (Port Number: 1-32767)
NOTE
When selecting [On], the certificates must be installed.
Embedded Web Server RX User Guide
RAW Port Select whether or not to receive documents using RAW Port.
*1
Value : Off, On