System/network, System/network -26, St name – TA Triumph-Adler P-C3560i MFP User Manual
Page 283: Network, Configures network settings
8-26
Setup and Registration (System Menu) > System Menu
System/Network
Configures machine system settings.
Network
[System Menu/Counter] key > [System/Network] > [Network]
Configures network settings.
Host Name
TCP/IP Settings
Item
Description
Host Name
Check the host name of the machine. Host name can be changed from Embedded Web Server
RX.
Changing Device Information (page 2-51)
Item
Description
TCP/IP
Set up TCP/IP to connect to the Windows network.
Value
: Off, On
IPv4 Settings
Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is set to
[On].
DHCP
Select whether or not to use the DHCP (IPv4) server.
Value
: Off, On
Auto-IP
Select whether to use Auto-IP.
Value
: Off, On
IP Address
Set the IP addresses.
Value
: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be entered.
Subnet Mask
Set the IP subnet masks.
Value
: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be entered.
Default Gateway
Set the IP gateway addresses.
Value
: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be entered.
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.