TA Triumph-Adler DC 2116 User Manual
Page 9

1-1
1
Preparations
Names of parts
Main body
1
Original cover — Open and close this cover when setting an original on the platen.
2
Platen — Set the original to be scanned face-down in the left-rear portion of the platen.
3
Original size indicator lines — Be sure to align the original with these lines when setting an
original on the platen.
4
Operation panel — Perform operations here.
5
Main switch — Turn this switch ON (|) when using the scanner.
6
Scanner interface connector — Use to connect the scanner to the computer network with a
10BASE-T or 100BASE-TX cable.
Important!
NEVER attempt to remove the Scanner Interface Card.
1
2
4
5
3