TA Triumph-Adler DC 2116 - Manual (Page 22)

Performing the Required Operation at the Scanner
3-2
4 Use the S and T keys to move D
to select the desired destination. An item can be selected from
Send to User PC (SEND TO USER PC), Private Book, and Common Book. Select the
desired item and press the Enter key.
When storing data in the PC of the transmitter (user):
Move
D
to select 2 Send to User PC (SEND TO
USER PC) and press the Enter key.
Note When registering a transmitter (user), you must set the IP address of the computer.
When selecting a destination (receiver) from the private
address book:
1. Move
D
to select 3 Private Book and press the
Enter key.
2. Move
D
to select the desired destination and press
the Enter key.
Notes • If a password has been registered for the selected destination, you must enter the password.
Enter the password using the numeric keys and press the Enter key.
• When you enter a displayed number using the numeric keys, the confirmation screen will
appear. When you press the EnterEnter key, the destination will be selected.
3. If you have selected the destination, move
D
to
select 000 Finish to select (000 SELECT.
COMPLETE) and press the Enter key.
When selecting a destination (receiver) from the common
address book:
Move
D
to select 4 Common Book and press the
Enter key.
Operate in a similar way to the procedure for the
private address book.
Notes • For the private address book, AddressBook must be started in the computer of the transmitter
(user).
• For the common address book, the destinations must be set with a web browser or
AddressEditor.
• Up to 20 destinations can be selected at the same time.
End
Send to User PC
Select Address Book
Private Book
: Off
End
Send to User PC
Select Address Book
Private Book
: Off
Select destination.
000
#---
001 AdrNOPQRSTUVWXYZ
Finish to select
Select destination.
000
#---
001 AdrNOPQRSTUVWXYZ
Finish to select
Send to User PC
Private Book
Select Address Book
Common Book
: Off