TA Triumph-Adler DC 2116 - Manual (Page 10)

Preparations
1-2
Operation Panel
1 System Menu/Counter key — Press this key when you want to set the network address, the
date/time, and the time difference of this scanner.
2 Message display — Indicates the scanner condition or setting values.
3 Numeric key — Press these keys when you want to enter a desired value directly. If there is a
number in front of the selection item, you can select the item with these Numeric keys.
4 Stop/Clear key — Press this key when you want to cancel setting and return to the previous
screen.
5 Reset key — Press this key when you want to cancel initial setting change or date/time setting.
6 Scanner key — Press this key when you want to switch the machine to the scanner mode.
When the scanner mode is selected, the scanner indicator will light up.
7 S and T cursor keys — Press these keys to select an item in various settings.
8 < and > cursor keys — Press these keys to change the date/time setting.
9 Enter (OK) Key — Press this key when you want to register a setting. Press this key when
scanning is completed
8
1 4 5 7 2
3 9
6