TA Triumph-Adler DC 2116 User Manual
Page 27
Performing the Required Operation at the Scanner
3-7
1
After completing the setting, display the scan setting
screen.
2
Set the original.
3
Press the Start key. Scanning the original starts.
4
When
Continue scan (MULTIPLE SCAN) is set On
on the scan setting screen, the screen will appear to
select whether to continue scanning originals or not
when scanning is complete.
Notes
•
To continue scanning, set the next original, change the settings as needed, and press the Start
key.
•
Press the Enter (OK) key when you want to complete scanning originals.
•
When you want to cancel all scanned copies, press the Stop/Clear key. Screen will return to
the scan setting screen of Step 1.
Ready to scan.
Auto
100%
Auto
600dpi
Press START Key to continue
Auto
100%
Press to Start TX
Auto
600dpi