TA Triumph-Adler DC 2025 - Manual (Page 25)

1-17
Section 1 Fax Operation (Basic Use)
1
2
4
5
(Inch)
(Metric)
6
(Inch)
(Metric)
7
Selecting the contrast
It is possible to select a contrast from among the 3 available
settings.
* The default setting is for Regular contrast.
1 If you want to change the contrast, touch the “Exposure
mode” key.
2 Select the desired contrast from among the 3 available.
Indicating the document size
When you set any documents that you want to transmit on the
platen, you will need to indicate the size of those documents.
This procedure is not necessary when transmitting documents
from the Document Processor.
1 In order to indicate the document size, touch the “Orig.
size setting” [“Original setting”] key.
2 Select the appropriate document size.
● Document contrast
Dark: For transmitting light documents at a darker contrast
Regular: For transmitting document with a normal contrast
Light: For transmitting dark documents at a lighter contrast
Saving a document for transmission
When the optional Printer/Scanner Kit is installed...
Perform the following procedure in order to save a document for
transmission on the administrator’s network computer.
The document can be saved as a PDF file or a TIFF file.
* In order to save a document for transmission, the IP address or
host name must be registered in the administrator’s computer.
(See page 8-5)
1 Touch the “Save Tx. original” key.
(Inch)
(Metric)
2 Touch the “On” key.
3 Select the desired type of file by touching the “PDF” or “TIFF”
key.