TA Triumph-Adler DC 2016 - Manual (Page 78)

Section 6 COPIER MANAGEMENT
6-22
2
Press either the Zoom (+) or Zoom (–) key to display “F17”.
Inch
specifications Metric specifications
3
Press the [OK] key.
Inch
specifications Metric specifications
4
Press either the Zoom (+) or Zoom (–) key and select “AtI”
when automatic detection in inch units is to be performed
and “AtC” when the detection is to be done in centimeter
units. When setting the Oficio II size, select “o2r”.
Inch
specifications Metric specifications
Note
Drawers 2, 3 and 4 will be displayed only when the
optional Paper Feeder is installed.
5
Press the [OK] key.
The display will return to that of Step 2.
Inch
specifications Metric specifications
Multi-bypass Tray Paper Size
Sets the Manual Paper Feed Size.
1
Display the Default Settings Mode. (Refer to P.6-11
"Default Settings Mode Operations Procedures".)
Inch specifications
Metric specifications
2
Press either the Zoom (+) or Zoom (–) key to display “F21”.
Inch specifications
Metric specifications
3
Press the [OK] key.
Inch specifications
Metric specifications
4
Press either the Zoom (+) key or the Zoom (–) key and select
the paper type.
Inch specifications
Metric specifications