Outputting the department management list, How to set the department management mode – TA Triumph-Adler DC 2016 User Manual
Page 61

Section 6 COPIER MANAGEMENT
6-5
5
Press the [OK] key.
The counter will be cleared and the display will return to
that of Step 2.
Outputting the Department
Management List
The Total No. of Copies by section can be output.
1
Display the Department Management Code.
(Refer to P.6-1 "Department Management Code
Operations Procedures".)
Inch
specifications
Metric
specifications
2
Press either the Zoom (+) or Zoom (–) key to display “d05”.
Inch
specifications
Metric
specifications
Note
Check to make sure that 11" × 8
1/2
"/A4 size paper is
loaded in the drawer.
3
Press the [OK] key.
The list will be output and the display will return to that of
Step 2.
Inch
specifications
Metric
specifications
Sample: Department Management List
How to set the Department
Management Mode
Set Department Management to enable or disable it.
1
Display the Department Management Code.
(Refer to P.6-1 "Department Management Code
Operations Procedures".)
Inch specifications
Metric specifications