TA Triumph-Adler FAX 925 - Manual (Page 99)

English
Chapter 7 - Reports 91
Protocol dump
In the event of a communications failure, the protocol dump report can be
printed out manually. This report can be helpful in analysing the cause of
the communication failure. Send this report to the supplier or service
centre if so requested.
Printing reports
Printing message confirmation report
After transmission, press the Copy key once (with no documents loaded)
to see a report confirming your last transmission on the display of your fax
machine. To print the report, press the Copy key a second time.
Printing other reports
1. Press the Select Function key.
2. Press the 6/Report Print One Touch key. The display shows
1:ACTIVITY REPORT.
3. Press the NO X key repeatedly until the report you want to print
appears on the display.
4. Press the W YES key. The report will begin printing.
5. Press the Select Function key to finish.
Codes used in reports
Result codes
The following codes indicate the results of communications.
Code Explanation
BUSY The line of the remote location was busy or there was no answer.
CANCL A confidential message was erased after being held in memory for 10 days.
COMP. A multiple-location transmission was completed.
COVER The machine’s cover was opened during the communication.
NO Transmission or reception failed due to a communications error.
OK Transmission or reception was completed successfully.